[helpie_notices group_id=’3’/]
FAQ
- What Are The Installation Location Requirements?
Concrete floor can meet the requirements, no other special requirements.
- Which Hydraulic Oil Should Be Used And How Much Oil Should Be Used?
The PBA 500, PBA 500+, and PBA 600+ models are all driven by servo motors and do not require hydraulic oil. Instead, a small amount of lubricating oil is used for maintenance.
In contrast, the PBA 600, PBA 1000, and PBA 1000# models use a hydraulic cylinder to drive the Y axis and require 46# anti-wear hydraulic oil. Specifically, the PBA 1000 and PBA 1000# models use 250 liters of oil.
- Which Anchor Bolts Should Be Used To Fix The Machine?
PBA series machines do not need to be fixed to the ground. Moreover, the machine will not vibrate during operation. The weight of the machine itself stabilizes the aluminum bending process.
- Does The Machine Have A Pneumatic Diagram?
PBA has no pneumatic components, so no pneumatic diagram is provided.
- Is There An Installation Diagram?
PBA is a ready-to-use machine, the whole machine is fully installed, so there is no need to provide an installation diagram.
- Is There A Layout Diagram?
We provide the machine’s installation dimensions. Therefore, you need to place the machine in a location with ample operating space, storage for aluminum profiles, and space for bending workpieces.
- What Is The HS Code?
HS Code:8462269000;
For India(HSN), it is coded as: 84622690